Efficiency of four different techniques in coupled HPLC-UV/VIS to quantify overlapping peaks with known spectral features

Summary Four different techniques to quantify unresolved chromatographic peaks with known spectral features combined with photodiode array detection, are investigated as regards their efficiency for the accurate and precise determination of drugs in the low g-range. The comparison includes peak suppression utilising difference chromatograms, first-order derivative chromatograms, selective chromatograms, generated by the calculation of orthogonal polynomial shares, and the powerful least-squares multicomponent analysis approach. Each of these methods uses UV-spectra taken throughout, the peak. The results presented and conclusions reached should enable the chromatographer to come to a decision about the reasonable use of these options now provided by multichannel detection in HPLC.     

On the calculation of expectation values and transition matrix elements by coupled cluster method

Summary Finite order expressions are derived for expectation values and transition matrix elements within the framework of the coupled cluster method.     

Characterization of fuel samples by on-line LC-GC with automatic group-type separation of hydrocarbons

Characterization of fuels by LC-GC is possible by use of automatic successive transfer (multiple transfer) of HPLC fractions to a GC via an on-column interface. This paper describes the instrumentation and the methodology for the HPLC separation of the hydrocarbons (aliphatic and aromatic) into separate groups and the on-line transfer of these groups to a capillary GC column. Two HPLC methods were used with the same valve configuration: single column (silica) with column back-flush to detector; and double column (silica and amino-bonded silica) with multiple fraction transfer and back-flush. The first method was used for the analysis of total saturated compounds and total aromatic compounds; the second was used for the separation of the one-, two-, three-, and four-ring aromatic compounds present in diesel fuels. Examples are shown of the characterization of diesel fuels, and the repeatability of the data.     

Forms of vibrations and structural changes in liquid state

Summary The forms of vibrations and displacements of particles in amorphous structures have been investigated. The particles, moving on highly non-linear amplitude, are responsible for the creation of disordered structures of amorphous bodies. The non-linear oscillators, even if 'few' in concentration, are characterized by unpredictable trajectories in phase space. The non-linear oscillators are fully developed in the liquid state above the crossover temperature T_cr and between T_cr and T_g their number decreases. Under T_g they completely disappear. The interconnection between the linear oscillators in blocks plays the most important role in the characteristic time spectra in liquid state. Using the additive properties of elements polarizibilities, the number of acoustical units in individual blocks at T_cr is estimated to be about 600 units. The diameter of blocks at T_cr was estimated to be about 1.8 nm. Even if the non-linear high amplitude motions disappear at solidification, the remnants of structural irregularity remain and the disordered structure of glass is formed.     

On-line LC-GC-AED and LC-GC-MS – multidimensional methods for the analysis of PAC in fuels,combustion emissions and atmospheric samples

The composition and concentration of polycyclic aromatic compounds (PAC) in fuels. Theier combustion products and in the atmosphere remains a topic of considerable interest. Despite the wealth of literature on the identification of PAC, speciation at low concentrations remains difficult due to instrument limitation and the complexity of fuel and environmental samples. Consequently on line sample preparation procedures (SPE, SFE, LC, etc.) are becomeing an increasingly important step in the analysis procedure particularly where sample clean-up and fractionation are essential for improving analytical resolution. In this study a normal phase high pressure analytical resolution. In this study a normal phase high pressure liquid chromatography-gas chromatography (LC-GC) system has been developed to provide quantitative analysis of samples, as diverse as coal liquids, petroleum fuels, diesel exhaust particulates, and urban air particulates. Separation and identification of parent and alkylated PAH, hetercycline nitro-and oxy-PAC can be achieved by direct coupling to an atomic emission detector and a bech top mass spectrometer. For both systems the primary LC separation combined with the large sample volume transferred to GC vastly improves detection limits. Furthermore the complimentary nature of the two detectors used enables the positive indentification of many unknowns.     

Speciation of chromium in waste waters by coupled column ion chromatography-inductively coupled plasma mass spectrometry

An application of coupled column ion chromatography (IC)-inductively coupled plasma mass spectrometry (ICP-MS) is presented for speciation of chromium in waste waters. By coupling an anion column with a cation column, both the cationic Cr(III) and anionic Cr(VI) species can be analyzed with detection limits below 0.5 μg/1. The separation of the interfering ions (chloride, chlorate, perchlorate, sulphate, sulphite, sulphide, thiosulphate, carbonate, cyanide and some organic compounds) from the chromium peaks is discussed, and the use of different chromium isotopes for data acquisition is compared. Based on the results, m/z 52 was considered as an ideal isotope for speciation of chromium in waste waters by the coupled column IC-ICP-MS, because it did not suffer from polyatomic interferences and due to the high sensitivity for chromium. The analysis of the waste water samples should be performed as soon as possible after sampling according to the stability tests of the species.     

Solar Photocatalytic Degradation of 4‐Chlorophenol in Kaolinite Catalysts

This research applies semiconductor photocatalysts, which are formed by metal ion exchange on the surface of kaolinite catalyst with cations, to the study of photocatalytic degradation of 4‐chlorophenol. The analysis results of catalyst properties shows that, after sintering at 400 °C, kaolinite catalyst has a particle size of between 10–100 nm indicating the nano level of synthesized catalysts. Under the same condition, kaolinite‐Ag/Zn catalyst works better in degradation efficiency than single kaolinite‐Ag and kaolinite‐Zn catalysts. Kaolinite‐Zn catalyst declines in degradation efficacy after 150 minutes and performs poorer than the other three types of kaolinite catalysts. In the experiments of different amounts of catalysts, when the concentration exceeds 0.1 wt%, utilization of light energy and degradation efficiency will be reduced due to shielding effect. When at different pH values, the higher the pH value, the more OH‐will be released and that is beneficial for reaction with substances and the increase of reaction rate. Finally multivariate analysis proves that there is one determining factor that influences the photocatalytic degradation of 4‐chlorophenol in kaolinite catalysts, named as “the factor with intermediates competition degree,” the one affecting the 4‐CP degradation at different weight percentages that is referred to as the “shielding effect factor.”     

Cu/TiO2-NiO上光促表面催化CO2和H2O合成CH3OH反应规律

采用溶胶-凝胶法制备了n(电子型)-p(空穴型) 复合半导体材料0.5％Cu/TiO2-2.0％NiO (w),利用X射线衍射(XRD)、透射电镜(TEM)、红外光谱(IR)、紫外-可见光漫反射(UV-Vis)、程序升温脱附(TPD)技术对材料结构、吸光性能、化学吸附性能进行了表征,研究了该材料对CO2和H2O合成CH3OH的光促表面催化反应(PSSR)规律.结果表明,所制备材料能够明显促进目的反应,室温条件下即有CH3OH生成.在200 ℃下,由于光-表面-热的协同效应,CO2转化率得以提高,且CH3OH的选择性达到87.5％ .根据实验结果,得出CO2在材料表面的卧式吸附态为CH3OH的前驱物,并对PSSR机理进行了讨论.     

ICP-AES法测定混凝土外加剂中微量氯离子

由于Cl^-过量引起混凝土钢筋锈蚀而过早的破坏，已成为世界性问题。混凝土外加剂中微量Cl^-是一个重要指标，准确测定氯离子的含量直接关系到混凝土配比的确定及浇灌后的质量。部颁及行业标准中是采用电化学滴定法和蒸馏法来测定混凝土外加剂的微量Cl^-[1,2]，电化学滴定法对测定干扰大。本文采用电感耦合等离子体原子发射光谱法间接测定与微量Cl^-定量反应后剩余的Ag^ 含量，从而换算出Cl^-的含量，经回收验证及比较，证明本法简便、灵敏、快速，切实可行。